SATO s84ex - Setting;Display Items

402
Setting/Display items 6.7.1
Sections that can be set and referred, and variables are listed in the table below.
TCP/IP related setting
Variable name
Setting range
Default (at shipment)
IPv4 IP address
0.0.0.0 - 255.255.255.255 *2
192.168.1.1
IPv4 Subnet mask
0.0.0.0 - 255.255.255.255
255.255.255.0 (calculated from the IP address)
IPv4 Gateway address
0.0.0.0 - 255.255.255.255
0.0.0.0
DHCP protocol
ENABLE/DISABLE
DISABLE
Keepalive time
30 - 300
180 (sec)
Keepalive retry
1 - 99
17 (times)
Socket cancel
Normal/Compatible
Normal
ROOT password
Any alphanumeric [16]*1
NULL (no password)
IPv6 IP address
0000: 0000: 0000: 0000: 0000:
0000: 0000: 0000 –
FFFF: FFFF: FFFF: FFFF:
FFFF: FFFF: FFFF: FFFF:
0000: 0000: 0000: 0000: 0000: 0000: 0000: 0000
IPv6 prefix
0 -128
64
IPv6 default router
0000: 0000: 0000: 0000: 0000:
0000: 0000: 0000 –
FFFF: FFFF: FFFF: FFFF:
FFFF: FFFF: FFFF: FFFF:
0000: 0000: 0000: 0000: 0000: 0000: 0000: 0000
IPv6 address resolve
MANUAL/DHCP/AUTO
AUTO
Web login name
Any alphanumeric [16]*1
admin
Web password
Any alphanumeric [16]*1
admin
*1 Numbers in [ ] are upper limit.
*2 The fixed IP will be displayed when DHCP is selected.