SATO s84ex - Loading the Ribbon and Media

31
21.1 Modification
21.1 ESC+0 Partial Editing
ESC+0
Hexadecimal
code
ESC
0
Parameter
<1B>
16
<30>
16
Nil
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set command is not maintained.
Valid range within item
The set command becomes invalid.
Valid range between item
The set command becomes invalid.
[Function]
Replacing a specified area of the previous label with new data.
[Format]
<0>
[Coding Example] [DFE], a part of print data, is changed to [123].
<A>
<V>100<H>200<P>2<L>0202<XM>ABC
<V>200<H>200<P>2<L>0202<XM>DEF
<Q>1
<Z>
<A>
<0>
<V>200<H>200<P>2<L>0202<XM>123
<Q>1
<Z>
[Notes]
1. Use this command to edit only one part of previous print data.
2. Specify the exact same parameters for the image to be replaced as were specified in the original data stream; including
rotation, expansion, pitch, etc. This will ensure the new data will exactly replace the old image.
3. A specified portion of the previous data will be cleared.
4. If Rotation <%> is included in the specified editing portion, keep it for partial editing.
5. Use this command with fixed pitch, same font or same digit number. Proportional pitch text cannot be used with this
command.
First media
Second media
Partial Editing
Media feed direction