219
Valid range and
term of
command
When the power switch is OFF
The set command is not maintained.
The set command becomes invalid.
The set command becomes invalid.
[Function]
Changing the printer status from online to offline.
[Format]
<@>
[Coding Example]
<A>
<@>
<Z>
[Notes]
1. Delimit Start o
f
Data Tran
smission <A> and End
of
Data Tran
smission <Z> with th
is command to u
se.
2. In receive mode of the printer, specify single-item buffer mode.
3. When this command is used at offline state, the printer goes offline when the printer status becomes online next time.
Offline
To Next Page
Loading...
