265
[Notes]
1. Calendar IC is necessary for this command. This command cannot be used without a calendar IC.
2. The printing is in real time when more than 2 QTY is specified.
3. Up to 6 calendar print commands can be specified in 1 form.
4. The maximum calendar print data is 16 characters.
5. WW (Week) of the parameter a is when the starting week is counted as 0, and ww (Week) is when the starting week is
counted as 1.
(Refer to the WW/ww command week examples for calendar print <WA>below)
6. Specify the font type for calendar printing of the font command (refer to the available command below) before this command.
7. Do not use font type command <OA> and <OB> when printing MMM, M, DDDDDDDDD, DDD, and D of the parameter a.
The lower case of the alphabet is not available with those fonts.
8. Use the control command >Z in a pair at before and after the parameter. When it is not used in a pair, it will be recognized as
text.
9. When there is return or line feed (<0D>
16
, <0A>
16
) in between >Z...>Z, it is not recognized as a pair.
10. When printing >Z, put >JZ instead of >Z.
11. When calendar is used as a parameter for barcode, according to the specifications of barcode. For example, it is not
possible to specify other than numeric data with GS1-128(UCC/EAN128), therefore MMM cannot be specified as the
parameter a.
12. Refer to calendar print<WA> for QQ(Time) of the parameter a.
[Valid Commands]
To Next Page
Loading...
