310
The return sequence of <RU>01 (In case of Gen2 tag that has TID= E200680612345678)
The setting of return by SOH+RU is maintained
Enabled until power is turned OFF
<IP0>e:h,epc:E0123456789ABCDEF0123456;
Write command
Acquire TID immediately after successful write,
and store it in the memory with the success
status.
Return the write status (write success) and TID
data
[STX]24,00,ID:E200680612345678[CR][LF]
[ETX] *2
*1. Most co
mm
on command
s such as <A>, <Z> are not
described
in the above diagra
m
.
*2 Content of the return EPC/TID is an example. The actual value varies depending on the tag.
[Notes]
1. EPC/TID data to be returned is up to 256 characters.
2. The printer writes data to tags and then read EPC/TID when <IP0> command is received.
To Next Page
Loading...
