SATO s84ex - Page 400

392
3) Process at the power off
DATA
STROBE
ACK
Printer
BUSY
SELEC
PE
FAUL
* Regardless of the state of signal line just before the power off, all signal line will be ground (0V) when 5V supplied by KB board is shut.
Power On
Printer
Initializing
Receive/Analysis/Edit (1)
Printing (1)
Online
Press the LINE key
Press the LINE key
Offline
Receive/Analysis/Edit (2)
Online
Printing (3)
ESC A..ESC Z (1) ESC A...ESC Z (2) ESC A.. ESC Z (3)
Receive/Analysis/Edit (3)
Printing (2)
Power off
5V power on the KB
board is off
Power off