SATO s84ex - Page 405

397
Wireless LAN specification
(1) Standard
IEEE802.1b/g/n
(2) Frequency band
2.4GHz
(3) Baud rate
Max. 11Mbps (Connected by IEEE802.11b)
Max. 54Mbps (Connected by IEEE802.11g)
Max. MCS7(*1) (Connected by IEEE802.11n)
*1) The maximum speed varies depending on the conditions Please refer the below.
Band width
Guard
interval
Baud rate
20MHz
800 nsec
65.0Mbps
400 nsec
72.2Mbps
40MHz
800 nsec
135.0Mbps
400 nsec
150.0Mbps
(4) Wireless LAN communication mode
Infrastructure mode
Ad Hoc mode
*In IEEE802.11n, only Infrastructure mode is available.
(5) Channel
1 - 13 (when connected with IEEE802.11b/g/n)
*AP channel will be used in the Infrastructure mode.
*A channel of the other side will be used when the other side's status is waiting for
connection in the Ad Hoc mode.
*Setting range will be different depending on the regional setting.
Region
Setting range
USA/Canada
1 - 11
Europe/Malaysia/Singapore/Korea/China
1 - 13
*Regardless of the regional setting, when the band width of the IEEE802.11n is
40MHz, the setting range will be 3 to 11 channel.
(6) SSID
Up to 32 alphanumeric characters and symbols (from 20H to 7EH) can be set.
(7) Authentication
Open System
Shared Key
WPA/WPA2
IEEE802.1x (EAP-TLS, LEAP, EAP-TTLS, EAP-PEAP(v0), EAP-FAST are
selectable. Hereafter written as "EAP".) .
(8) Encryption scheme
None
WEP
(Open System, Shared key and 802.1x authentication are selectable)
TKIP
(must be selected from WPA-PSK/WPA2-PSK and WPA-802.1x/WPA2-802.1x
authentication)
AES
(must be selected from WPA-PSK/WPA2-PSK and WPA-802.1x/WPA2-802.1x
authentication)