SATO s84ex - Page 41

33
[S-86ex]
Head density
Valid range (dots)
The horizontal position of
the top left corner of the
area
Horizontal length of the
image area to be copied
The vertical position of the
top left corner of the area
Vertical length of the image
area to be copied
8 dots/mm (203 dpi)
1 to 1340
1 to 9992
12 dots/mm (305 dpi)
1 to 2010
1 to 14988
* The command error occurs when the image exceeded the printable area due to the difference between the print start
position, base reference point and dot number even the parameter is in the valid range.