SATO SG112-ex - Page 101

4 Operation and Configuration
99
SG112-ex Operator Manual
BAUDRATE
Set the RS-232C baudrate (bps).
The following baudrates are available:
•2400
•4800
•9600
• 19200
• 38400
• 57600
• 115200
Note
• Shows only if the RS-232C interface is selected.
• The setting will be effective only if you power on the product again.
PARITY BIT
Set the RS-232C parity bit.
The following options are available:
•NONE
•ODD
• EVEN
Note
• Shows only if the RS-232C interface is selected.
• The setting will be effective only if you power on the product again.
STOP BIT
Set the RS-232C stop bit.
The following options are available:
•1BIT
•2BIT
Note
• Shows only if the RS-232C interface is selected.
• The setting will be effective only if you power on the product again.