SATO SG112-ex - Paper End and Ribbon End Detection; Paper End

8 Appendix
199
SG112-ex Operator Manual
8.6 Paper End and Ribbon End Detection
8.6.1 Paper End
Paper End Detection in Feed Operation
After the paper end is detected, the product stops the feed operation immediately and generates an
error.
• Paper end sensor detects the absence of media and sends a paper end error message at the
position after the media is fed 15mm (0.6”).
Paper End Detection in Print Motion
Operation varies by the number of remaining print steps when the paper end occurs during print
operation.
Media feed direction
Print head
Paper end sensor
117.13 mm (4.6”)
15 mm
(0.6”)
(1) (2)
Media feed direction
Print head
Paper end sensor
117.13 mm (4.6”)
15 mm
(0.6”)
(1) (2)