SATO SG112-ex - Media Sensor Positions and Option Positions

8 Appendix
198
SG112-ex Operator Manual
8.5 Media Sensor Positions and Option
Positions
The media sensor positions and various operation mode (option) positions are as follows:
Media feed direction
36.2 mm
(1.4”)
22.5 mm
(0.9”)
Tear-off
Media Guide Media Guide
Print head
Cutter
Auto-feed sensor
56.6 mm
(2.2”)
46.2 mm
(1.8”)
65.5 mm ~ 150 mm
(2.6” ~ 5.9”)
131 mm ~ 300mm (5.15” ~ 11.8”)
117.1 mm
(4.6”)
Gap
I-mark
Paper end
5 mm
(0.2”)
Gap sensor
I-mark
sensorPaper end sensor
25.0 mm
(1.0”)
Printable width 266.7mm (10.5”)