SATO SG112-ex - Installing the Optional USB Memory

2 Installing the Product
39
SG112-ex Operator Manual
2.6.3 Installing the Optional USB Memory
When using the USB memory for the first time, format the USB memory in the Memory mode. Refer to
Section 4.2.7 Memory Mode for details.
1 Power off the product.
2 Insert the optional USB memory into the
USB connector (Type A)on the front
of the product.
Note
• USB flash memory: Maximum 32 GB.
• The product does not support USB memory with security functions such as fingerprint authentications.
• The product does not support connection through the USB hub.
To remove the USB memory from the product
Power off the product before removing the USB memory.
CAUTION
Do not remove the USB memory while the product is accessing the data in the USB memory. Doing so may
result in data corruption.
USB