SATO SG112-ex - Adjusting the Print Quality; Adjusting the Print Darkness

5 Adjusting the Product
155
SG112-ex Operator Manual
5.5 Adjusting the Print Quality
You can adjust the print quality by adjusting the print darkness and print speed.
5.5.1 Adjusting the Print Darkness
The adjustment procedure for the print darkness is as follows:
Note
You can fine tune the print darkness by setting the DARKNESS in the adjustments mode. Refer to Section
4.2.3 Adjustment Mode for details.
1 When the product is in online mode,
press the LINE button to change the
product to offline mode.
2 Press the ENTER button.
The product changes to setting mode menu.
3 Select the USER MODE using the
/// buttons.
USER MODE shows on the screen and the icon is
highlighted in reverse.
4 Press the ENTER button to enter the user
mode.
OFFSET VOLUME shows on the screen.