SATO SG112-ex - Advanced Mode

4 Operation and Configuration
114
SG112-ex Operator Manual
4.2.8 Advanced Mode
The advanced mode lets you configure the more advanced features of the product hardware.
The flowchart shows the sequence of the setting screens for the advanced mode. The table describes
each setting screen in detail.
ENTER button
CANCEL button
ENTER button
CANCEL button
ENTER button
ENTER button
(CUTTER/ CONTINUOUS)
CANCEL button
ENTER button
(TEAR OFF/
PRINTER CUT)
CANCEL button
(TEAR OFF/
PRINTER CUT)
ENTER button
“DISABLE” +
ENTER button
CANCEL button
(CUTTER/
CONTINUOUS)
ENTER
button
CANCEL button
(TEAR OFF/PRINTER CUT)
CANCEL button
“ENABLE” + ENTER button
CANCEL button
(CUTTER/ CONTINUOUS)
CANCEL button
CANCEL button
ENTER button (CUTTER)
ENTER button
(PRINTER CUT)
ENTER button
(TEAR OFF/
CONTINUOUS)
CANCEL button
ENTER button
ENTER button
CANCEL button
Proceed to .
A-A
* Press the , , or button to select an item or set the value
accordingly. The active arrow icons are shown on the screen.
* Pressing the FUNCTION button on each screen will revert to the
ADVANCED MODE menu.