SATO SG112-ex - Print Operation

8 Appendix
202
SG112-ex Operator Manual
8.7 Print Operation
The following print operations are selectable by setting in the advanced mode and using SBPL
commands.
Motion 1: Backfeed after printing
Motion 2: Backfeed before printing
M
otion 3 Cut & Print
Pitch sensor
ENABLE
Printer Type
Tear-off
mode
Pitch sensor
DISABLE
Continuous
mode
Cutter mode
Pulse
No input
Backfeed
None
Backfeed
Yes
Pulse
Input
Backfeed
None
Backfeed
Yes
Motion 1
Motion 1
Motion 2
Pulse
No input
Continuous
mode
Pulse
No input
Cutter mode
Pulse
No input
Backfeed
None
Backfeed
Yes
Motion 1
Pulse
Input
Backfeed
None
Backfeed
Yes
Motion 1
Motion 2
Motion 2
Pulse
No input
Pulse
Input
Pulse
Input
Pulse
Input
Motion 3
Motion 2