2 Installing the Product
26
SG112-ex Operator Manual
2.2
Installation Space
Make sure that there is sufficient space around the product so that the top cover can be fully opened
when operating or cleaning the product, or replacing consumables. And make sure that there is sufficient
space on the rear side of the product so that the media or the optional unwinder can be installed.
The illustrations in this section show the product from different angles, providing dimensions and spatial
requirements.
2.2.1
Front View
475 mm (18.7”)150 mm
(5.9”)
320 mm (12.6”)
150 mm
(5.9”)
265 mm (10.4”)
To Next Page
Loading...
