SATO SG112-ex - Installing the Top Cover

1 Basic Information
18
SG112-ex Operator Manual
1.1.1 Installing the Top Cover
The product is packed with the top cover detached. Attach the top cover to the product’s main body
before using it.
1 Align and match the shape of the top cover’s bracket hole with the pin on the product
side.
2 Pull the pin on the top cover side to the left and align the tip of the pin with the hole of
this product.
3 Release the pin and make sure that the pin of the top cover has entered the hole of this
product.
Outer view of top cover Inner view of top cover