5 Adjusting the Product
144
SG112-ex Operator Manual
5.2
Adjusting the Buzzer Volume
In normal mode (online or offline), press the button repeatedly to adjust the volume of the buzzer.
1 When the product is in online or offline mode, press the button to show the current
buzzer volume of the product.
The buzzer volume icon is shown on the top right corner of the screen.
2 Pressing the button will cycle through the volume level and the buzzer will beep
according to the volume.
Note
• When default setting is activated, the buzzer volume will set to the initial value as level 2.
• The buzzer volume level icon will not show if another screen is refreshed.
• When the buzzer setting has changed by commands, the setting will be reflected after the product is
rebooted.
button
This illustration shows the screen images of
the volume adjustment in offline mode.
button
button
button button
To Next Page
Loading...
