SATO SG112-ex - Parts Identification of the Product; Front View

1 Basic Information
20
SG112-ex Operator Manual
1.3 Parts Identification of the Product
1.3.1 Front View
1
5
4
3
6
2

Top cover

Operator panel
Refer to Section 1.4.1 Operator Panel for
details.

Power (I/O) switch
Press this switch to turn on (I) or turn off (O)
the power.

USB connector (Type A)
Enable the storage of product settings
information with USB memory.
CAUTION
Be sure to perform a virus check on the USB
memory before connecting it to the product. SATO
Corporation shall not be held responsible for any
product malfunctions caused by a virus spread via
USB memory.

Media discharge outlet

Media tray
Holds the cut media after feed out from the
media discharge outlet.