SATO SG112-ex - Memory Storage Folder Structure

8 Appendix
194
SG112-ex Operator Manual
8.3 Memory Storage Folder Structure
SD cards or USB memories are used when downloading or uploading data (graphic data or external
characters) and the firmware from or to the product. The following folder structure of the memory storage
shows the folders name and files name that are saved (read) when uploading (downloading).
DATA
PROG
FONT
Firmware
Firmware : PRG52**_XX.BIN (XX㸸Reg. No. 01 ~ 07)
Kanji outline font : Kan1_O.BIN
Kanji font (Ryobi font) : Kan1_R0.BIN
Chinese font (Simplified characters) :Kan1_GB18.BIN
Chinese font (Traditional Chinese) :Kan1_BIG5.BIN
KB Firmware 㸸PRG55_01.BIN
Data for memory card commands
Form overlay registration : SBPLXXXX.OVL (XXXX㸸Reg. No. 0001 ~ 0099)
Format registration : SBPLXXXX.FMT (XXXX㸸Reg. No. 0001 ~ 0999)
Graphic registration : SBPLXXXX.IMG (XXXX㸸Reg. No. 0001 ~ 0999)
BMP file registration : SBPLXXXX.BMP (XXXX㸸Reg. No. 0001 ~ 0999)
PCX file registration : SBPLXXXX.PCX (XXXX㸸Reg. No. 0001 ~ 0999)
Memory card 16×16 External character registration 㸸SBPL16.BMF
Memory card 24×24 External character registration 㸸SBPL24.BMF
PR52
Downloaded font / log
Downloaded font data : USRFONTX.DAT (X㸸Reg. No. (1 ~ 1))
CONF
Product setting
Product setting file : 㸸PRN52.INI(Text)
㸸PRN52.BIN(Binary)
RAS
LOG
Maintenance
Receive buffer : RCVBUF.DAT
STATUS5 log : HISTSTS5.DAT
SD card/USB memory
root