8 Appendix
228
SG112-ex Operator Manual
8.9
Interface Specifications
For data communication with the host, this product supports the following interfaces:
You can set the various interface settings of the product through the Interface Mode menu.
• USB Interface (Type B)
• LAN Interface (10BASE-T/100BASE-TX automatic switch over, RJ45 connector)
• RS-232C Interface (DSUB 9 pins, female)
• IEEE1284 Interface (Amphenol 36 pins, female)
• External signal (EXT) Interface (Amphenol 14 pins, female)
• USB Host (Type A)
CAUTION
Do not connect or disconnect the interface cables (or use a switch box) with power supplied to either the
product or host. This may cause damage to the interface circuitry in the product or host and is not covered by
warranty.
To Next Page
Loading...
