SATO SG112-ex - (Head Check Enabled); Continuous Mode, Pitch Sensor Enabled and no Pulse Input

8 Appendix
204
SG112-ex Operator Manual
8.7.2 Continuous Mode, Pitch Sensor Enabled and No Pulse Input
(Head Check Enabled)
(1) Operation
(1) (2) (3)
Print head Pitch sensor
(
Ga
p)
(1) (2) (3) (4)
Print the 1st label
+ Head check
Standby
(1) (2) (3) (4) (5)
(1) (2) (3) (4) (5) (6)
Print the 2nd label
+ Head check
Print the 3rd
l
abel
+
Head check
Note
The positions shown above are the base reference point when using the Gap sensor.
(2) Timing chart
Label feed
PRIN
External signal
PREND (TYPE1)
PREND (TYPE2)
PREND (TYPE3)
PREND (TYPE4)
Head check
Operation
Print the 1st label Print the 2nd label Print the 3rd label
Power ON
Media feed direction