8 Appendix
221
SG112-ex Operator Manual
8.8
Product Specifications
Specifications are subject to change without notice.
8.8.1
Hardware
Dimensions and Weight
Width 475 mm (18.7”)
Height 320 mm (12.6”)
Depth 314 mm (12.3”)
Weight Approximately 23 kg (50.7 lbs.)
Power Supply
Input Voltage AC 100 V - 240 V ±10%
Frequency 50 - 60 Hz
Power Consumption At peak: 413 VA / 404 W (Print ratio 30%, darkness: 10,
print speed: 6 inch/sec)
Standby: 28 VA / 24 W
Input voltage condition: AC 100 V, 50 Hz
Processing
CPU 32 Bit RISC-CPU 250 MHz
Flash ROM 40 MB (User area: 4.5 MB)
SDRAM 64 MB
Receive Buffer Maximum: 2.95 MB
Near full: 2 MB, Release: 1 MB
External Memory SD card: Maximum 2 GB
SDHC card: Minimum 4 GB - Maximum 32 GB
USB flash memory: Maximum 32 GB
Operation
LCD Graphic LCD (Horizontal 128 dots X Vertical 64 dots) with backlight (White/
orange switchable)
LED POWER: Green
ON LINE: Green
STATUS: Green/Red
LABEL: Red
RIBBON: Red
Environmental Conditions (Without Media and Ribbon)
Operating Temperature 5 to 40 °C (41 to 104 °F)
Storage Temperature -5 to 60 °C (23 to 140 °F)
Operating Humidity 30 to 80% RH (Non-condensing)
Storage Humidity 30 to 90% RH (Non-condensing)
To Next Page
Loading...
