1 Basic Information
19
SG112-ex Operator Manual
1.2
Optional Devices
The optional devices for the product are as follows. The optional devices can be factory installed or
installed by the customer engineer. Contact your SATO reseller or technical support center.
Note
For more details about the optional devices, contact your SATO reseller.
Optional Devices Description
Stacker (STG112) Allows stacking of cut media for continuous high
volume printing.
Unwinder (UWG112) Allows a large media roll of up to 10.5" wide to be
run through the product.
Real-time clock (Calendar) kit A calendar system for printing the date and time on
a label to output.
To Next Page
Loading...
