4 Operation and Configuration
133
SG112-ex Operator Manual
4.2.12
Default Setting Mode
The product can be reset to the default setting as in the factory preset.
CAUTION
It is generally not necessary to perform the initialization. Doing so will remove all the customer settings.
Note
Refer to Section 8.1 List of Initial Values for the details of the initial value of each setting items.
The flowchart shows the sequence of the setting screens for the default setting mode. The table
describes each setting screen in detail.
DEFAULT MODE
Select the item to be initialized.
• PRINTER SETTING: Initialize the settings of the product.
• ALT. PROTOCOL: Initialize the protocol code.
CANCEL or
FUNCTION button
Select ALT.PROTOCOL
+ ENTER button
Press
CANCEL
button
+
Switch Power to On “ I ”
Select PRINTER SETTING
+ ENTER button
Select YES +
ENTER button
Select NO +
ENTER button
Waiting to be powered off.
* Press the , , or button to
select an item or set the value
accordingly. The active arrow icons
are shown on the screen.
To Next Page
Loading...
