SATO SG112-ex - Page 136

4 Operation and Configuration
134
SG112-ex Operator Manual
DEFAULT PRINTER SETTING
Select whether or not to initialize the settings of the product.
• YES: Initialize the settings of the product.
• NO: Cancel and return to the DEFAULT MODE screen.
Note
Shows only if DEFAULT MODE is set to PRINTER SETTING.
DEFAULT ALT. PROTOCOL
Select whether or not to initialize the protocol code.
• YES: Initialize the protocol code.
• NO: Cancel and return to the DEFAULT MODE screen.
Note
Shows only if DEFAULT MODE is set to ALT. PROTOCOL.
DEFAULT SETTING COMPLETED
Shows when the initialization has been completed.
Note
The setting will be effective only if you power on the product again.