SATO SG112-ex - Canceling the Print Job

4 Operation and Configuration
63
SG112-ex Operator Manual
4.2.2 Canceling the Print Job
Cancel the print job according to the following procedure. When the print job is canceled, the data stored
in the receive buffer of the product is also deleted.
1 Press the LINE button to change the
product to offline mode.
2 Press the CANCEL button.
CANCEL PRINT JOB shows, confirming that you
want to cancel the print job.
3 Press the / buttons to select YES.
Note
• Be sure you want to cancel the print job before
selecting YES. The job cannot be recovered and it
has to be transmitted to the product again.
• Press the FUNCTION button or CANCEL button to
exit the CANCEL PRINT JOB mode without clearing
the print data.
4 Press the ENTER button to confirm.
CANCEL PRINT JOB COMPLETED shows with
three beeps sound. The product then enters to
offline mode. The print job is canceled.