SATO SG112-ex - Page 64

4 Operation and Configuration
62
SG112-ex Operator Manual
When you send a pause command during printing, the product stops the print job and enters pause
mode.
In offline mode, you can cancel the print job, feed the media or enter the setting mode menu.
POWER ON LINE STATUS LABEL RIBBON
FUNCTION ENTER CANCEL
Shows the remaining
print job.
Resume the print job.
Adjust the display
brightness.
Adjust the buzzer
volume.
POWER ON LINE STATUS LABEL RIBBON
FUNCTION ENTER CANCEL
Shows the remaining
print job.
Enters online mode
or pause mode.
Adjust the display
brightness.
Adjust the buzzer
volume.
Enters adjustment
mode.
Feed a piece of
media.
Enters the setting
mode menu.
Enters cancel print
job setting mode.