SATO SG112-ex - Adjusting the Print Speed

5 Adjusting the Product
156
SG112-ex Operator Manual
5 Press the ENTER button again until PRINT
DARKNESS shows on the screen.
6 Press the / buttons to select a value.
The setting range is from 1 to 10. 1 is the lightest
and 10 is the darkest.
7 Press the ENTER button to save the
setting.
8 Press the FUNCTION button to return to
the setting mode menu.
5.5.2 Adjusting the Print Speed
The adjustment of the print speed not only changes the speed of printing but also affects the print quality.
The setting range of the print speed is from 3 to 6 inches/sec.
The adjustment procedure for the print speed is as follows:
1 When the product is in online mode,
press the LINE button to change the
product to offline mode.
2 Press the ENTER button.
The product changes to setting mode menu.
3 Select the USER MODE using the
/// buttons.
USER MODE shows on the screen and the icon is
highlighted in reverse.
4 Press the ENTER button to enter the user
mode.
OFFSET VOLUME shows on the screen.