SATO SG112-ex - Interface Mode

8 Appendix
188
SG112-ex Operator Manual
8.1.3 Interface Mode
CLEAN PRINTER NOTICE DISTANCE 000 m Yes Yes
CHANGE ROLLER NOTICE DISTANCE 000 km Yes Yes
CHANGE HEAD NOTICE DISTANCE 000 km Yes Yes
CHANGE CUTTER NOTICE TIMES 000000 Yes Yes
Setting Item Initial Value
Default
(Setting)
Factory
(ALL)
INTERFACE SETTING NO - -
PORT SELECT DATA PORT Yes Yes
DATA PORT USB Yes Yes
SUB PORT NONE Yes Yes
USB
PROTOCOL STATUS4 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
LAN
DHCP SETTING DISABLE - Yes
RARP SETTING DISABLE - Yes
IPv4 ADDRESS 192.168.001.001 - Yes
IPv4 SUBNET MASK 255.255.255.000 - Yes
IPv4 GATEWAY ADR 0.0.0.0 - Yes
IPv6 RESOLUTION AUTO - Yes
IPv6 ADDRESS 0000:0000:0000:0000:
0000:0000:0000:0000
-Yes
PREFIX LENGTH 064 - Yes
DEFAULT ROUTER 0000:0000:0000:0000:
0000:0000:0000:0000
-Yes
PORT NUMBER1 01024 - Yes
PORT NUMBER2 01025 - Yes
PORT NUMBER3 09100 - Yes
PROTOCOL STATUS4 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
STATUS REPLY TIMING ENQ (When STATUS4 is selected) Yes Yes
Setting Item Initial Value
Default
(Setting)
Factory
(ALL)