SATO SG112-ex - Appendix

8 Appendix
189
SG112-ex Operator Manual
RS-232C
BAUDRATE 19200 Yes Yes
PARITY BIT NONE Yes Yes
STOP BIT 1 BIT Yes Yes
CHARACTER BIT 8 BIT Yes Yes
PROTOCOL STATUS4 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
RECEIVE BUFFER MULTI (When READY/BUSY, XON/
XOFF is selected)
Yes Yes
IEEE1284
PROTOCOL STATUS4 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
RECEIVE BUFFER MULTI (When STATUS4 is selected) Yes Yes
IEEE1284 ACK SIGNAL 00.5us (When 1ITEM is selected) Yes Yes
EXTERNAL DEVICE ENABLE Yes Yes
IGNORE CR/LF NO Yes Yes
IGNORE CAN/DLE NO (When STATUS4 is selected) Yes Yes
SNTP FUNCTION DISABLE - Yes
IPv4/6 select IPv4 - Yes
NTP IPv4 ADDRESS
NTP IPv6 ADDRESS
IPv4: 000.000.000.000
IPv6: 0000:0000:0000:0000:
0000:0000:0000:0000
-Yes
TIME ZONE 00:00 - Yes
ERROR NOTICE DISABLE - Yes
SNMP FUNCTION DISABLE - Yes
SNMP SET SELECT SNMP SETTING - -
SNMP SETTING SNMPv1/v2c[1] - -
COMMUNITY NAME SNMP v1/v2c[1] : public
SNMP v1/v2c[2] : NULL
-Yes
COMMUNITY WRITE DISABLE - Yes
USER NAME Null - Yes
AUTH PROTOCOL NONE - Yes
AUTH KEY Null - Yes
PRIVACY PROTOCOL NONE - Yes
Setting Item Initial Value
Default
(Setting)
Factory
(ALL)