SATO SG112-ex - Operation and Configuration; Display and Operation

3 Loading the Ribbon and Media
49
SG112-ex Operator Manual
3.4.2 Loading Media Roll
When using media roll, an optional UWG112
unwinder
 is required. Contact your SATO reseller
for more details.
Note
Refer to the installation manual of the optional
UWG112 unwinder for more details.
1 Install the optional unwinder to the back of
the product.
Insert the end of the media feeder tray  so that it
is in between the product’s rubber feet.
2 Loosen the securing screw  on one side
of the media feeder spindle , align the
scale with the media width, and tighten the
securing screw .
1
2
3
4