SATO SG112-ex - Usable Media

3 Loading the Ribbon and Media
46
SG112-ex Operator Manual
3.3 Usable Media
This product can print on two types of media; media roll with an optional unwinder and fan-fold media.
The product uses media sensors to detect I-marks or Gaps on the media in order to precisely print the
content.
Perforation
Gap labelI-mark label
Media feed direction
Media feed direction
Media feed direction
3mm
(0.12”)
1.5mm (0.06”)
3mm
(0.12”)
14mm
(0.55”)
1.5mm (0.06”)
3mm
(0.12”)
Ø 76 mm (3”)
Max. Ø 200 mm (8”)
Perforation
I-mark printed
on the reverse
side
I-mark
printed on
the reverse
side
Fan-fold tag/ journal paper
I-mark tag/ Journal paper
Tag roll/ journal paper roll
3mm
(0.12”)
14mm
(0.55”)
Fan-fold label
Label roll
Perforation Perforation
Ø 76 mm (3”)
Max. Ø 200 mm (8”)
I-mark
printed on
the reverse
side
Perforation
I-mark printed
on the reverse
side