SATO SG112-ex - When Sensor Is Disabled

8 Appendix
219
SG112-ex Operator Manual
8.7.17 When Sensor is Disabled
When the media sensor is disabled, the product stops at the specified print end position.
Note
The minimum media size varies with the print speed that controls the number of steps to accelerate/
decelerate the motor.
Print Speed Minimum media size (mm)
2 inches/sec 10
3 inches/sec 10
4 inches/sec 10
5 inches/sec 10
6 inches/sec 15
 ABCABC
 ABC


 
ۃ
Head position
 
 
Standby
Print the 1st label
Print the 2nd label


0HGLDIHHGGLUHFWLRQ