8 Appendix
200
SG112-ex Operator Manual
[When the print content falls within the area from the print head position to 15 mm (0.6”) less than
the label end sensor.]
• After completing the print of media (1), “Paper end error” will occur.
• After releasing the error, media (1) will not be printed again.
[When the media pitch size is between the print head position and the paper end sensor, and is
more than [117.13 mm -15 mm] (4.6” - 0.6”).]
• “Paper end error” will occur while printing the media (1), right after detecting “paper end”.
• If an error occurs while printing, media (1) will be printed again after releasing the error. If the print
job is completed at the time an error occurs, media (1) will not be printed again.
Media feed direction
Print head
15 mm
(0.6”)
(1) (2)
When the print
content falls
within this area
Paper end sensor
[117.13 mm - 15 mm] (4.6” - 0.6”)
(1)
Media feed direction
Print head
15 mm
(0.6”)
Paper end sensor
[117.13 mm - 15 mm] (4.6” - 0.6”)
To Next Page
Loading...
