SATO SG112-ex - Page 105

4 Operation and Configuration
103
SG112-ex Operator Manual
PROTOCOL
Set the communication protocol.
• STATUS4: When selected, the product will proceed to the RECEIVE
BUFFER screen.
• STATUS5: When selected, the product will proceed to the ITEM NO.
CHECK screen.
ITEM NO. CHECK
Set the item number check function.
• ENABLE: Enable the item number check function.
• DISABLE: Disable the item number check function.
Note
Shows only if PROTOCOL is set to STATUS5.
BCC CHECK
Set the BCC check function.
• ENABLE: Enable the BCC check function.
• DISABLE: Disable the BCC check function.
Note
Shows only if PROTOCOL is set to STATUS5.
RECEIVE BUFFER
Set the receive buffer type.
• MULTI: Multiple receive buffers.
• 1ITEM: A single receive buffer.
Note
Shows only if PROTOCOL is set to STATUS4.