SATO SG112-ex - Page 112

4 Operation and Configuration
110
SG112-ex Operator Manual
STORED NO. INFORMATION
Shows the stored number of the registered information.
The stored number range is from 001 to 999.
Note
After you press the ENTER button, the screen returns to PLEASE
SELECT MEMORY.
MEMORY FORMAT
Select whether or not to format the memory.
• YES: Format the memory.
• NO: Do not format the memory.
FORMAT START
Confirm to start formatting the memory.
• YES: Start to format the memory.
• NO: Cancel formatting the memory.
Note
If you select NO, the screen returns to MEMORY FORMAT.
FORMATTING
Shows the formatting progress of the memory.
Note
After formatting the memory card, a completion message will show.