4 Operation and Configuration
112
SG112-ex Operator Manual
COMPLETE
Shows when the setting information of the product has been saved to
memory.
Note
After three beeps, the screen returns to MEMORY MODE.
SELECT MEMORY ORIGIN
Select the memory to copy the setting information.
The following options are available:
• SD CARD
• USB MEMORY
Note
Shows only if MEMORY MODE is set to SETTING UPLOAD.
READING (SETTING UPLOAD)
Shows while the product is reading the setting information data.
Note
Automatically shows the WRITING screen upon completion.
WRITING (SETTING UPLOAD)
Shows while the product is writing the setting information data.
Note
Automatically shows the PRINTER SETTING COMPLETED screen upon
completion.
To Next Page
Loading...
