4 Operation and Configuration
52
SG112-ex Operator Manual
• Trace mode status
•Buzzer volume
• Warning Icons
Icon Description
Shows after receiving any data while trace mode is ENABLE.
Shows after receiving ESC (1BH) A while trace mode is ENABLE.
Shows after print operation while trace mode is ENABLE.
Icon Description
Shows when the volume is level 3 (Loud).
Shows when the volume is level 2 (Medium).
Shows when the volume is level 1 (Low).
Shows when the volume is level 0 (Mute).
Icon Description
Shows when a ribbon “near end” is detected.
Shows when a command error is detected.
Shows when a receive buffer “near full” is detected.
Shows when print head damage is detected.
To Next Page
Loading...
