Segger J-Link - Page 114

114 CHAPTER 3 J-Link software and documentation package
J-Link / J-Trace (UM08001) ©
2004-2017 SEGGER Microcontroller GmbH & Co. KG
Parameter
Enc: Encoding type, only 0 ("UART encoding") is allowed. Hexadecimal.
Description
Returns the base frequency and the minimum divider of the connected J-Link. With
this information, the available SWO speeds for J-Link can be calculated and the
matching one for the target CPU frequency can be selected.
Response
<BaseFreq>,<MinDiv>
ReturnValue is empty on error.