Segger J-Link - J-Link Commander (Command Line Tool)

J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG
71
3.2 J-Link Commander (Command line tool)
J-Link Commander (JLink.exe) is a tool that can be used for verifying proper instal-
lation of the USB driver and to verify the connection to the target CPU, as well as for
simple analysis of the target system. It permits some simple commands, such as
memory dump, halt, step, go etc. to verify the target connection.