Segger J-Link - Setup & Compatibility with Various Debuggers

To Next Page

To Previous Page

267

7.4 Setup & compatibility with various debuggers

7.4.1 Setup

In compatible debuggers, flash breakpoints work if the J-Link flash loader works and

a license for flash breakpoints is present. No additional setup is required. The flash

breakpoint feature is available for internal flashes and for external flash (parallel

NOR CFI flash as well as QSPI flash). For more information about how to setup vari-

ous debuggers for flash download, please refer to Setup for various debuggers (inter-

nal flash) on page 251. Whether flash breakpoints are available can be verified using

the J-Link control panel:

7.4.2 Compatibility with various debuggers

Flash breakpoints can be used in all debugger which use the proper J-Link API to set

breakpoints. Compatible debuggers/ debug interfaces are:

• IAR Embedded Workbench

•Keil MDK

• GDB-based debuggers

• Freescale Codewarrior

• Mentor Graphics Sourcery CodeBench

• RDI-compliant debuggers

Incompatible debuggers / debug interfaces:

• Rowley Crossworks

Other manuals for Segger J-Link