Segger J-Link - Digi: JTAG Link

J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG
65
2.5.3 Digi: JTAG Link
Digi JTAG Link is an OEM version of J-Link, sold by Digi Interna-
tional.
Limitations
Digi JTAG Link works with Digi devices only. This limitation can
NOT be lifted; if you would like to use J-Link with a device from an
other manufacturer, you need to buy a separate J-Link.
Licenses
License for GDB Server is included. Other licenses can be added.
2.5.4 IAR: J-Link / J-Link KS
IAR J-Link / IAR J-Link KS are OEM versions of J-Link, sold by IAR.
Limitations
IAR J-Link / IAR J-Link KS cannot be used with Keil MDK. This lim-
itation can NOT be lifted; if you would like to use J-Link with Keil
MDK, you need to buy a separate J-Link. IAR J-Link does not sup-
port kickstart power.
Licenses
No licenses are included. All licenses can be added.
2.5.5 IAR: J-Link Lite
IAR J-Link Lite is an OEM version of J-Link, sold by IAR.
Limitations
IAR J-Link Lite cannot be used with Keil MDK. This limitation can
NOT be lifted; if you would like to use J-Link with Keil MDK, you
need to buy a separate J-Link.
JTAG speed is limited to 4 MHz.
Licenses
No licenses are included. All licenses can be added.
Note: IAR J-Link is only delivered and supported as part of Starter-Kits. It is not
sold to end customer directly and not guaranteed to work with custom hardware.