338 CHAPTER 12 RDI
J-Link / J-Trace (UM08001) ©
2004-2017 SEGGER Microcontroller GmbH & Co. KG
10. A project or an image is needed for debugging. After downloading, J-Link is used
to debug the target.
12.3.4 GHS MULTI
12.3.4.1 Software version
J-Link RDI has been tested with GHS MULTI version 4.07. There should be no prob-
lems with other versions of GHS MULTI. All screenshots are taken from GHS MULTI
version 4.07.
12.3.4.2 Configuring to use J-Link RDI
1. Start Green Hills Software MULTI integrated development environment. Click Con-
nect
| Connection Organizer to open the Connection Organizer.
To Next Page
Loading...
