Segger J-Link - Example XML File

J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG
295
10.6 Example XML file
The following shows an example of a complete XML device description file.
<Database>
<Device>
<ChipInfo Vendor="Vendor0"
Name="Device0"
WorkRAMAddr="0x20000000"
WorkRAMSize="0x4000"
Core="JLINK_CORE_CORTEX_M0" />
<FlashBankInfo Name="Int. Flash"
BaseAddr="0x0"
MaxSize="0x10000"
Loader="Vendor0/Loader0.FLM"
LoaderType="FLASH_ALGO_TYPE_OPEN" />
<FlashBankInfo Name="SPIFI Flash"
BaseAddr="0x30000000"
MaxSize="0x100000"
Loader="Vendor0/Loader1.FLM"
LoaderType="FLASH_ALGO_TYPE_OPEN" />
</Device>
<Device>
<ChipInfo Vendor="Vendor1"
Name="Device1"
WorkRAMAddr="0x20000000"
WorkRAMSize="0x4000"
JLinkScriptFile="Vendor1/Device1.jlinkscript"
Core="JLINK_CORE_CORTEX_M0" />
<FlashBankInfo Name="Int. Flash"
BaseAddr="0x70000000"
MaxSize="0x10000"
Loader="Vendor1/Loader0.FLM"
LoaderType="FLASH_ALGO_TYPE_OPEN" />
</Device>
<Device>
<ChipInfo Vendor="ST"
Name="STM32F746NGH6" />
<FlashBankInfo Name="SPIFI Flash"
BaseAddr="0x30000000"
MaxSize="0x80000"
Loader="ST/STM32F7xx_SPIFI.FLM"
LoaderType="FLASH_ALGO_TYPE_OPEN" />
</Device>
</Database>