150 CHAPTER 3 J-Link software and documentation package
J-Link / J-Trace (UM08001) ©
2004-2017 SEGGER Microcontroller GmbH & Co. KG
3.11 J-Link RDI (Remote Debug Interface)
The J-Link RDI software is a remote debug interface for J-Link. It makes it possible to
use J-Link with any RDI compliant debugger. The main part of the software is an RDI-
compliant DLL, which needs to be selected in the debugger. There are two additional
features available which build on the RDI software foundation. Each additional fea-
ture requires an RDI license in addition to its own license. Evaluation licenses are
available free of charge. For further information go to our website or contact us
directly.
Note: The RDI software (as well as flash breakpoints and flash downloads) do
not require a license if the target device is an LPC2xxx. In this case the software ver-
ifies that the target device is actually an LPC 2xxx and have a device-based license.
3.11.1 Flash download and flash breakpoints
Flash download and flash breakpoints are supported by J-Link RDI. For more infor-
mation about flash download and flash breakpoints, please refer to J-Link RDI User’s
Guide (UM08004), chapter Flash download and chapter Breakpoints in flash memory.
To Next Page
Loading...
