28 CHAPTER 1 Introduction
J-Link / J-Trace (UM08001) ©
2004-2017 SEGGER Microcontroller GmbH & Co. KG
1.1 Requirements
Host System
To use J-Link or J-Trace you need a host system running Windows 2000 or later. For a
list of all operating systems which are supported by J-Link, please refer to Supported
OS on page 29.
Target System
A target system with a supported CPU is required.
You should make sure that the emulator you are looking at supports your target CPU.
For more information about which J-Link features are supported by each emulator,
please refer to Model comparison on page 31.
To Next Page
Loading...
