Segger J-Link - Supported Ides

J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG
53
1.7 Supported IDEs
J-Link / J-Trace can be used with different IDEs. Some IDEs support J-Link directly,
for other ones additional software (such as J-Link RDI) is necessary in order to use J-
Link. The following tables list which features of J-Link / J-Trace can be used with the
different IDEs.
ARM7/9
ARM Cortex-M3
ARM11
ARM11 has currently been tested with IAR EWARM only.
IDE
Debug
support
4
Flash
download
Flash
breakpoints
Trace
support
3
IAR EWARM yes yes yes yes
Keil MDK yes yes yes no
Rowley yes yes no no
CodeSourceryyesnonono
Yargato (GDB) yes yes yes no
RDI compliant
toolchains such as
RVDS/ADS
yes
1
yes
1
yes
1
no
IDE
Debug
support
4
Flash
download
Flash
breakpoints
Trace
support
3
SWO
support
IAR EWARM yes yes yes yes yes
Keil MDK yes yes yes yes yes
Rowley yes yes no no no
CodeSourcery yes no no no no
Yargato (GDB) yes yes yes no no
IDE
Debug
support
4
Flash
download
Flash
breakpoints
Trace
support
3
IAR EWARM yes
no
2
no
2
no
Rowley yes
no
2
no no
Yargato (GDB) yes
no
2
no
2
no
1
Requires J-Link RDI license for download of more than 32KBytes
2
Coming soon
3
Requires emulator with trace support
4
Debug support includes the following: Download to RAM, memory read/write, CPU
register read/write, Run control (go, step, halt), software breakpoints in RAM and
hardware breakpoints in flash memory.