Segger J-Link - Original SEGGER Products

To Next Page

To Previous Page

2.4 Original SEGGER products

All of the follwing SEGGER products are supported by the OSs stated in Chapter 1.2

Supported OS

The following products are original SEGGER products for which the use of the J-Link

software is allowed:

2.4.1 J-Link BASE

J-Link BASE is a JTAG emulator designed for ARM cores. It con-

nects via USB or Ethernet to a PC running Microsoft Windows,

Apple OSX or Linux. J-Link BASE has a built-in 20-pin JTAG con-

nector, which is compatible with the standard 20-pin connector

defined by ARM.

Included Licenses

J-Link Flashloaders

J-Link GDB Server

Optional Licenses:

J-Link Debugger

J-Flash

Unlimited Flash Breakpoints

RDI / RDDI

2.4.2 J-Link PLUS

J-Link PLUS is a USB powered JTAG emu-

lator supporting a large number of CPU cores.

Based on a 32-bit RISC CPU, it can communicate at high speed

with the supported target CPUs. J-Link is used around the world

in tens of thousand places for development and production

(flash programming) purposes.

J-Link is supported by all major IDEs such as IAR EWARM, Keil

MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX,

Renesas HEW, Renesas e2studio, and many others.