J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG
133
3.6 J-Flash
J-Flash is an application to program data images to the flash of a target device. With
J-Flash the internal flash of all J-Link supported devices can be programmed, as well
as common external flashes connected to the device. Beside flash programming all
other flash operations like erase, blank check and flash content verification can be
done.
J-Flash requires an additional license from SEGGER to enable programming. For
license keys, as well as evaluation licenses got to http://www.segger.com or contact
us directly.
To Next Page
Loading...
